Rate law
rate = k[A]m[B]n. Found only by experiment.
Unit 6: Reaction Rates and Kinetics, lesson 2
Lesson 1 showed that a reaction slows as its reactants run low. A rate law says exactly how the rate depends on each concentration, and it can only be found by experiment.
Three quick questions on ideas this lesson uses. They are not scored.
1.The concentration of a reactant falls by 0.060 M in 30 s. What is the average rate, in M/s?
Rate = 0.060 M30 s = 0.0020 M/s.
2.What is 32?
32 = 3 × 3 = 9.
3.The initial rate of a reaction is the rate …
The initial rate is the instantaneous rate at the start, when the concentrations are the ones you mixed.
For a reaction between A and B, the rate law has this form.[OpenStax Chemistry 12.3]
rate = k[A]m[B]n
Each part has a name.
The orders are usually 0, 1 or 2. They are not the coefficients from the balanced equation. Two reactions with the same coefficients can have different orders, so the only way to find them is to measure rates.
Key idea
A rate law is found by experiment. You cannot write it by looking at the balanced equation.
The order tells you what happens to the rate when you change one concentration and keep everything else the same.
Rate against the concentration of A for three reactions. For the zero order reaction the line is flat: the rate stays at 1 whatever the concentration. For the first order reaction the line is straight and slopes up: at 1 molar the rate is 1 and at 2 molar it is 2. For the second order reaction the line curves upward: at 1 molar the rate is 1 and at 2 molar it is 4.
Try it: what the order predicts
A reaction has the rate law rate = k[X]2[Y].
To find the orders, run the reaction several times. Each time, start with different concentrations and measure the initial rate. The data below are for a reaction A + B → C.
| Experiment | [A] (M) | [B] (M) | Initial rate (M/s) |
|---|---|---|---|
| 1 | 0.10 | 0.10 | 2.0 × 10−3 |
| 2 | 0.20 | 0.10 | 4.0 × 10−3 |
| 3 | 0.10 | 0.20 | 8.0 × 10−3 |
Step 1. Pick two experiments where only [A] changes. In experiments 1 and 2, [B] stays at 0.10 M while [A] doubles from 0.10 M to 0.20 M.
Step 2. See what the rate did. The rate went from 2.0 × 10−3 to 4.0 × 10−3 M/s. It doubled. Doubling [A] doubled the rate, so the reaction is first order in A.
Step 3. Pick two experiments where only [B] changes. In experiments 1 and 3, [A] stays at 0.10 M while [B] doubles.
Step 4. See what the rate did. The rate went from 2.0 × 10−3 to 8.0 × 10−3 M/s. It went up 4 times. Doubling [B] made the rate 4 times as large, and 4 is 22, so the reaction is second order in B.
Step 5. Write the rate law. rate = k[A][B]2. The overall order is 1 + 2 = 3.
The pattern to remember: find the factor the concentration changed by, find the factor the rate changed by, and ask what power connects them.
rate factor = (concentration factor)order
Once you know the orders, any one experiment gives k. Rearrange the rate law and put in the numbers from experiment 1.
k = rate[A][B]2 = 2.0 × 10−30.10 × 0.102 = 2.0 M−2 s−1
The units of k are whatever makes the rate come out in M/s. They depend on the overall order, so the units of k tell you the overall order.
| Overall order | Example rate law | Units of k |
|---|---|---|
| 0 | rate = k | M s−1 |
| 1 | rate = k[A] | s−1 |
| 2 | rate = k[A]2 | M−1 s−1 |
| 3 | rate = k[A][B]2 | M−2 s−1 |
The rate constant does not change when concentrations change. It changes only if the temperature changes or a catalyst is added. Later lessons explain why.
With the full rate law you can predict the rate for any concentrations. Suppose [A] = 0.30 M and [B] = 0.20 M in the reaction above.
rate = (2.0 M−2 s−1)(0.30 M)(0.20 M)2 = 0.024 M/s
Try it: another table
For 2 X + Y → Z: when [X] doubles with [Y] fixed, the rate goes up 4 times. When [Y] doubles with [X] fixed, the rate does not change.
Common mistake
Orders are not the coefficients of the overall equation. They come from experiments. Also watch the arithmetic: if doubling a concentration makes the rate four times as large, the order is 2, not 4.
Strategy
In a table of initial rates, pick two experiments where only one concentration changes. Ask what the concentration was multiplied by and what the rate was multiplied by. The order is the power that turns the first number into the second. Repeat for each reactant, then use any one row to find k.
rate = k[A]m[B]n. Found only by experiment.
Zero: no effect on rate. First: rate changes by the same factor. Second: rate changes by the factor squared.
Compare two experiments where one concentration changes. The rate factor equals the concentration factor raised to the order.
Solve the rate law for k using one experiment. k is fixed at one temperature.
Overall order 0: M s−1. Order 1: s−1. Order 2: M−1 s−1. Order 3: M−2 s−1.
0 of 10 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
A reaction has the rate law rate = k[NO]2[O2]. What is the overall order?
Add the exponents.
For rate = k[NO]2[O2], the concentration of NO is tripled while [O2] stays the same. By what factor does the rate increase?
The reaction is second order in NO.
Use the table for the reaction A + B → products. Give the order in each reactant.
| Experiment | [A] (M) | [B] (M) | Initial rate (M/s) |
|---|---|---|---|
| 1 | 0.20 | 0.10 | 1.5 × 10−4 |
| 2 | 0.40 | 0.10 | 6.0 × 10−4 |
| 3 | 0.20 | 0.30 | 4.5 × 10−4 |
(a) Order in A
(b) Order in B
Compare experiments 1 and 2 for A, and experiments 1 and 3 for B.
For the same data, the rate law is rate = k[A]2[B]. Use experiment 1 to find the value of k. (Its units are M−2 s−1.)
| Experiment | [A] (M) | [B] (M) | Initial rate (M/s) |
|---|---|---|---|
| 1 | 0.20 | 0.10 | 1.5 × 10−4 |
| 2 | 0.40 | 0.10 | 6.0 × 10−4 |
| 3 | 0.20 | 0.30 | 4.5 × 10−4 |
k = rate ÷ ([A]2[B]).
A rate constant is reported as 4.2 M−1 s−1. What is the overall order of the reaction?
The rate must come out in M/s. How many concentrations must multiply k?
In a reaction, doubling the concentration of reactant Q has no effect on the rate. What is the order in Q?
2 raised to what power equals 1?
A reaction follows rate = k[A][B] with k = 0.50 M−1 s−1. What is the rate when [A] = 0.20 M and [B] = 0.40 M, in M/s?
Put the numbers straight into the rate law.
The graph shows rate against [A] for a reaction A → products. What is the order in A?
A graph of rate against the concentration of A. The line is straight, starts at the origin and slopes upward.
What kind of rate law gives a straight line through the origin?
The reaction NO2 + CO → NO + CO2 is found by experiment to have the rate law rate = k[NO2]2. Which statement is correct?
Where do orders come from?
Use the table for X + Y → products. In experiment 4, both concentrations are different from experiment 1. What is the missing initial rate, in M/s?
| Experiment | [X] (M) | [Y] (M) | Initial rate (M/s) |
|---|---|---|---|
| 1 | 0.10 | 0.10 | 0.0030 |
| 2 | 0.20 | 0.10 | 0.0060 |
| 3 | 0.10 | 0.20 | 0.0120 |
| 4 | 0.20 | 0.20 | ? |
Find both orders first. Then apply both changes to the rate from experiment 1.
Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.
Sections read: 0%. Practice: 0 answered.