AP ChemistryAll courses
Reference

Unit 6: Reaction Rates and Kinetics, lesson 5

Collision theory and what changes a rate

Rate laws describe how fast reactions go. Collision theory explains why. Particles must meet, they must hit hard enough, and they must be facing the right way.

  • About 15 minutes
  • 5 sections
  • 8 practice questions
  • Narrated

After this lesson you can

  • State the three things a collision needs in order to cause a reaction.
  • Explain, using collisions, why higher concentration gives a faster rate.
  • Explain the two ways a higher temperature speeds up a reaction.
  • Explain the effect of surface area for a solid reactant.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.The temperature of a gas is a measure of the average … of its particles.

    Question 1: choose one
    See the answer

    Temperature measures the average kinetic energy of the particles. Hotter particles move faster.

  2. 2.Breaking a chemical bond …

    Question 2: choose one
    See the answer

    Energy is always needed to pull bonded atoms apart. Energy is released when bonds form.

  3. 3.A reaction is first order in A. If [A] doubles, the rate …

    Question 3: choose one
    See the answer

    First order means the rate is proportional to [A].

Reactions need collisions

For two particles to react, they first have to meet. Atoms cannot trade partners from a distance. This simple idea is the start of collision theory.[OpenStax Chemistry 12.5]

In a gas or a solution, particles collide all the time. In a gas at room conditions, one molecule has billions of collisions every second. If every collision led to a reaction, almost every reaction would be over in an instant. Most are not. So most collisions must fail.

Collision theory says a collision leads to reaction only if it passes two tests.

Test one: enough energy

Reacting means breaking bonds, and breaking bonds takes energy. That energy comes from the motion of the colliding particles. If they meet gently, they bounce apart unchanged. If they meet with enough energy, bonds can start to break and new ones can start to form.

The least energy a collision needs in order to react is called the activation energy. Its symbol is Ea. Lesson 6 is all about it.

Test two: the right orientation

Energy is not enough. The particles also have to be facing the right way, so that the atoms that will bond actually touch.

Take carbon monoxide reacting with oxygen, O2, to make carbon dioxide. A new bond has to form between the carbon atom and an oxygen atom. That can only happen if the carbon end of CO is the end that hits.[OpenStax Chemistry 12.5]

CO arrives
Carbon monoxide meets oxygen carbon end firstA carbon monoxide molecule moves toward an oxygen molecule with its carbon atom in front. The carbon atom is the one that touches the oxygen molecule. OCOO COO2 C meets O: a new C–O bond can form

Right orientation. The carbon atom reaches the oxygen molecule, so a new carbon–oxygen bond can start to form.

The same two molecules meeting two different ways.
Describe this figure

A carbon monoxide molecule moves toward an oxygen molecule with its carbon atom in front. The carbon atom is the one that touches the oxygen molecule. Right orientation. The carbon atom reaches the oxygen molecule, so a new carbon–oxygen bond can start to form.

A carbon monoxide molecule moves toward an oxygen molecule with its oxygen atom in front. The carbon atom is at the back, away from the oxygen molecule. Wrong orientation. The carbon atom is facing away, so the molecules bounce apart unchanged, however hard they hit.

A collision that passes both tests is called an effective collision. Only effective collisions make products.

Key idea

A reaction happens only when particles collide, with at least the activation energy, in the right orientation. The rate depends on how many effective collisions happen each second.

Changing the rate

Anything that gives more effective collisions per second makes a reaction faster. Try it in the box below. Circles are A and squares are B. A reaction needs an A to hit a B hard enough.

Concentration
Temperature

Press Start. Circles are A and squares are B.

Count the A–B collisions, and how many are energetic enough, at different settings.
Describe this figure

A box holding two kinds of particles, circles called A and squares called B, moving in straight lines and bouncing off the walls and each other. Keys set the concentration to low, medium or high, and the temperature to cool, warm or hot. A readout counts the collisions between an A and a B, and how many of those were energetic enough to react; those particles flash yellow. With more particles there are more collisions. At a higher temperature the particles move faster, there are more collisions, and a much larger share of them are energetic enough.

Two settings change the count, and they do it in different ways.[OpenStax Chemistry 12.2]

Concentration. More particles in the same space means more collisions each second. The share of collisions that are energetic enough stays about the same, but there are more of them in total. This is why rate laws have concentration terms in them.

Temperature. Hotter particles move faster. They collide a little more often. Much more important, they collide harder, so a far larger share of collisions have at least the activation energy.

Try it: collisions and rate

The concentration of a reactant is raised. Collisions per second
The main reason a higher temperature speeds a reaction up
Two molecules collide very hard but facing the wrong way
Show the reasoning
  • The concentration of a reactant is raised. Collisions per second: increase. More particles in the same space meet more often.
  • The main reason a higher temperature speeds a reaction up: more of the collisions have enough energy. Collisions are a little more frequent, but the big change is in how many have at least the activation energy.
  • Two molecules collide very hard but facing the wrong way: they bounce apart unchanged. A collision needs enough energy and the right orientation.

Surface area and the reactants themselves

Two more things change a rate.[OpenStax Chemistry 12.2]

Surface area. When a solid reacts with a liquid or a gas, collisions can only happen at the surface of the solid. Crushing a lump into powder exposes much more surface. More surface means more collisions each second and a faster reaction. This is why powdered sugar dissolves faster than a sugar cube, and why fine dust in a grain silo can explode.

The nature of the reactants. Some reactions are fast and some are slow even at the same concentration and temperature. Reactions that need strong bonds to break have a large activation energy, so few collisions succeed. Reactions between oppositely charged ions in solution are usually very fast, because no bonds need to break first.

A catalyst also changes the rate. Lesson 8 explains how.

Common mistake

Raising the temperature does make collisions a little more frequent, but that is not the main reason the rate rises. The main reason is that a much larger share of the collisions now have enough energy to react.

Strategy

For any “why does the rate change” question, say which of two things changed.

  • How often particles collide: concentration, pressure, surface area.
  • What share of collisions succeed: temperature, a catalyst.

Key concepts

Collision theory

Particles must collide to react, and only some collisions work.

Effective collision

A collision with at least the activation energy and the right orientation.

Concentration

More particles in the same space gives more collisions per second.

Temperature

Faster particles collide a little more often, and a much larger share of collisions have enough energy.

Surface area

More exposed surface on a solid gives more collisions per second.

Practice

0 of 8 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1collision theoryOpen

    According to collision theory, which collisions lead to a reaction?

    Question 1: choose one
    Hint

    There are two tests.

    Text solution
    1. A collision must have at least the activation energy.
    2. The particles must also be oriented so the right atoms meet.
    3. Only collisions that pass both tests are effective.
  2. Q2concentrationOpen

    Why does increasing the concentration of a reactant in solution usually increase the rate?

    Question 2: choose one
    Hint

    What changes when more particles share the same space?

    Text solution
    1. Concentration does not change how fast the particles move or how much energy a collision needs.
    2. It increases the number of collisions per second.
    3. More collisions per second means more effective collisions per second.
  3. Q3temperatureOpen

    A reaction mixture is warmed. Which statement gives the main reason the rate increases?

    Question 3: choose one
    Hint

    Temperature changes how fast particles move. It does not change the reaction's energy hill.

    Text solution
    1. Warming does not change the activation energy.
    2. It gives the particles more kinetic energy.
    3. A much larger share of collisions then have at least the activation energy.
  4. Q4surface areaOpen

    A 5 g lump of zinc and 5 g of zinc powder are each added to the same acid. Which reacts faster, and why?

    Question 4: choose one
    Hint

    Where can acid particles collide with zinc atoms?

    Text solution
    1. Acid particles can only hit zinc atoms at the surface.
    2. The powder has far more surface for the same mass.
    3. More collisions per second gives a faster reaction.
  5. Q5orientationOpen

    Two reactant molecules collide with more than the activation energy, but no reaction happens. What is the most likely reason?

    Question 5: choose one
    Hint

    Which of the two tests did this collision pass?

    Text solution
    1. The collision had enough energy, so it passed the energy test.
    2. It must have failed the orientation test.
    3. The atoms that need to bond did not meet.
  6. Q6temperature, concentrationOpen

    For each change, say what happens to the fraction of collisions that have at least the activation energy.

    (a) Concentration is doubled

    Question 6 part a: choose one

    (b) Temperature is raised

    Question 6 part b: choose one
    Hint

    Which change makes particles move faster?

    Text solution
    1. Doubling the concentration gives more collisions, but each one is no more energetic. The fraction stays the same.
    2. Raising the temperature makes collisions more energetic. The fraction increases.
  7. Q7rate law linkOpen

    In a gas-phase reaction, the volume of the container is halved at constant temperature. What happens to the rate, and why?

    Question 7: choose one
    Hint

    Same number of molecules, half the space.

    Text solution
    1. Halving the volume doubles the concentration of each gas.
    2. Molecules are closer together and collide more often.
    3. The rate increases.
  8. Q8natureOpen

    Solutions of silver nitrate and sodium chloride form solid silver chloride the moment they are mixed. Why is this reaction so fast?

    Question 8: choose one
    Hint

    What particles are in the two solutions before mixing?

    Text solution
    1. The solutions contain separate Ag+ and Cl− ions.
    2. The ions attract each other and no bonds need to break first.
    3. The activation energy is very small, so almost every meeting succeeds.
Moreextra practice, new numbers every timenot scored

Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.

Sources

  • OpenStax Chemistry 12.2. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 12.2, Factors Affecting Reaction Rates. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/12-2-factors-affecting-reaction-rates
  • OpenStax Chemistry 12.5. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 12.5, Collision Theory. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/12-5-collision-theory

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?