Selective precipitation
Separating ions by adding a reagent that makes one solid form before another.
Unit 7: Equilibrium and Solubility, lesson 13
Different solids start to precipitate at different concentrations. By adding a reagent slowly, a chemist can pull one ion out of a mixture as a solid while another stays dissolved.
Three quick questions on ideas this lesson uses. They are not scored.
1.A precipitate just begins to form when …
Below Ksp the solution is unsaturated. Solid appears once Q reaches Ksp.
2.Ksp for AgCl is 1.6 × 10−10. In a solution with [Cl−] = 0.10 M, what [Ag+] makes Q equal to Ksp, in M?
[Ag+] = 1.6 × 10−100.10 = 1.6 × 10−9 M.
3.Which number is smaller?
10−14 is a million times smaller than 10−8.
Suppose a solution contains two different ions, and you want to separate them. One way is to add something that forms a solid with both, but at very different concentrations. The solid that needs less of the added ion forms first. If you stop adding at the right moment and filter, one ion is in the solid and the other is still in the solution. This is called selective precipitation.[OpenStax Chemistry 15.1]
The tool is the calculation from the end of lesson 12. For each solid, set Q equal to Ksp and find the concentration of the added ion at which that solid just begins to form.
A solution contains 0.010 M Cl− and 0.010 M I−. Silver ions are added slowly, as a solution of silver nitrate. Both AgCl and AgI are only slightly soluble. Their Ksp values are 1.6 × 10−10 and 1.5 × 10−16.[OpenStax Chemistry, Appendix J]
Step 1. Find the silver concentration that starts AgI. [Ag+] = Ksp[I−] = 1.5 × 10−160.010 = 1.5 × 10−14 M
Step 2. Find the silver concentration that starts AgCl. [Ag+] = Ksp[Cl−] = 1.6 × 10−100.010 = 1.6 × 10−8 M
Step 3. Compare. AgI needs far less silver, so AgI precipitates first. It begins when [Ag+] reaches 1.5 × 10−14 M.
Step 4. Keep adding. As more silver goes in, more AgI forms and [I−] falls. AgCl does not begin until [Ag+] has climbed all the way to 1.6 × 10−8 M.
Key idea
The solid that needs the lowest concentration of the added ion precipitates first.
The useful question is how much iodide is still dissolved at the moment silver chloride starts to form. At that moment [Ag+] is 1.6 × 10−8 M, and the solution is still saturated with AgI. So the iodide left must satisfy the Ksp of AgI.
[I−] = Ksp(AgI)[Ag+] = 1.5 × 10−161.6 × 10−8 = 9.4 × 10−9 M
The iodide started at 0.010 M. Less than one millionth of it is left in the solution when the first speck of AgCl appears. That is an excellent separation. Filter at that point, and nearly all the iodide is in the solid while all the chloride is still dissolved.
A separation works well when the two starting concentrations of the added ion are far apart, as they are here. If they are close together, the second solid starts to form while much of the first ion is still in solution, and the solids come out mixed.
For AgCl and AgI, the solid with the smaller Ksp came out first. That shortcut only works when the two solids have the same ion ratio and the two ions start at the same concentration. Otherwise you have to calculate.
A solution contains 0.010 M Cl− and 0.010 M CrO42−. Silver ions are added. The Ksp of Ag2CrO4 is 9.0 × 10−12, which is smaller than the value for AgCl.[OpenStax Chemistry, Appendix J]
AgCl begins at [Ag+] = 1.6 × 10−100.010 = 1.6 × 10−8 M. Ag2CrO4 begins at [Ag+]2 = 9.0 × 10−120.010, so [Ag+] = 3.0 × 10−5 M.
Silver chloride forms first, even though its Ksp is the larger of the two. The silver concentration is squared in the expression for silver chromate, and that changes the answer.
Try it: which comes first?
A solution has 0.010 M Br− and 0.010 M Cl−. Ag+ is added slowly. Ksp: AgBr 5.0 × 10−13, AgCl 1.6 × 10−10.
Selective precipitation is one of the oldest tools in chemistry. It is used to find out which metal ions are in an unknown solution, by adding reagents in a set order and seeing what comes out at each stage. It is also used on a large scale to remove toxic metal ions from waste water, and to recover valuable metals from ores.
Common mistake
The salt with the smaller Ksp does not always come out first. That shortcut works only when the salts have the same ion ratio and the ions start at the same concentration.
Strategy
For each ion, calculate the concentration of the added ion needed to start its precipitate. The smallest one goes first. To judge the separation, find how much of the first ion is left at the moment the second starts.
Separating ions by adding a reagent that makes one solid form before another.
The solid that begins to form at the lowest concentration of the added ion.
When the second solid begins, the first ion’s concentration is its Ksp divided by the added ion’s concentration at that moment.
Needs the two starting points to be far apart.
The smaller Ksp comes first only when the solids have the same ion ratio and the ions start equal.
0 of 7 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
A solution contains 0.010 M Ba2+ and 0.010 M Ca2+. Sulfate is added slowly. Ksp: BaSO4 2.3 × 10−8, CaSO4 6.1 × 10−5. Which solid precipitates first?
Find the sulfate concentration needed for each.
For the same solution, at what [SO42−] does CaSO4 begin to precipitate, in M?
[SO42−] = Ksp[Ca2+].
For the same solution, what is [Ba2+] at the moment CaSO4 begins to precipitate, in M?
At that moment [SO42−] = 6.1 × 10−3 M, and the solution is saturated with BaSO4.
A solution contains 0.010 M Ag+ and 0.010 M Pb2+. Chloride is added slowly. Ksp: AgCl 1.6 × 10−10, PbCl2 1.6 × 10−5. At what [Cl−] does PbCl2 begin to precipitate, in M?
[Cl−]2 = Ksp[Pb2+].
In the solution from the last question, AgCl begins at [Cl−] = 1.6 × 10−8 M and PbCl2 at 0.040 M. Which statement is correct?
Compare the two starting points.
What makes two ions easy to separate by selective precipitation?
Think about how much of the first ion is left when the second solid starts.
A solution has equal concentrations of Cl− and CrO42−. Ag2CrO4 has a smaller Ksp than AgCl, but AgCl precipitates first when Ag+ is added. Why?
Write both Ksp expressions.
Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.
Sections read: 0%. Practice: 0 answered.