Reversible reaction
A reaction that runs in both directions. It is written with a double arrow.
Unit 7: Equilibrium and Solubility, lesson 1
Many reactions never finish. They run forward and backward at once, and they settle into a mixture in which nothing seems to change. This lesson is about what is really going on in that mixture.
Three quick questions on ideas this lesson uses. They are not scored.
1.A reaction is first order in A. As A is used up, the rate of the reaction …
The rate is proportional to [A]. Less A means a slower reaction.
2.On a graph of concentration against time, a flat line means the concentration is …
A flat line has zero slope, so the concentration is constant. It does not have to be zero.
3.Water is being poured into a sink at the same rate that water drains out. The water level …
Water in equals water out, so the level holds steady while water keeps moving through.
In Unit 6, every reaction ran one way. Reactants turned into products until a reactant ran out. Many reactions are not like that. Their products can react with each other and turn back into reactants. A reaction that can run in both directions is called a reversible reaction.
A good example is a colorless gas called dinitrogen tetroxide, N2O4. Each molecule can split into two molecules of nitrogen dioxide, NO2, which is a brown gas. Two molecules of nitrogen dioxide can also join back together.[OpenStax Chemistry 13.1]
N2O4(g) ⇌ 2 NO2(g)
The double arrow says that both directions happen. Reading left to right gives the forward reaction. Reading right to left gives the reverse reaction.
Seal some colorless dinitrogen tetroxide in a glass tube and watch. The gas slowly turns brown as nitrogen dioxide forms. Then the color stops getting darker. It never becomes as dark as pure nitrogen dioxide would be. Both gases are still in the tube, and they stay there.[OpenStax Chemistry 13.1]
Why does the color stop changing? The answer comes from rates.
Take the simplest reversible reaction. A turns into B, and B turns back into A. Start with only A. At first the forward reaction is fast, because there is plenty of A. The reverse reaction cannot happen at all, because there is no B yet.
As time passes, A is used up, so the forward reaction slows down. B builds up, so the reverse reaction speeds up. One rate is falling and the other is rising. They must meet.
Two curves on the same axes. The forward rate starts high, at 0.060 molar per second, and falls. The reverse rate starts at zero and rises. The two curves come together at 0.024 molar per second after about 40 seconds, and from then on they run along the same flat line.
Once the two rates are equal, A is being made exactly as fast as it is being used. The same is true for B. So neither concentration changes any more. This state is called chemical equilibrium.
Key idea
At equilibrium, the rate of the forward reaction equals the rate of the reverse reaction. Because of that, the concentrations stop changing.
The box below holds 150 particles. Circles are A and squares are B. Any A can turn into a B, and any B can turn back. A particle flashes when it changes. The graph under the box counts the particles as time passes.
Press Start, and watch two things: the lines on the graph, and the flashes in the box.
Press Start. Circles are A and squares are B.
A box holding 150 moving particles. Circles are A and squares are B. Any A can turn into a B, and any B can turn back into an A; a particle flashes yellow when it changes. Keys choose whether the box starts with only A, only B, or half of each. Under the box, a graph draws the number of A particles as a solid line and the number of B particles as a dashed line against time. Whatever the start, the lines level off near 60 A and 90 B after about 40 seconds. A readout counts the changes in each direction over the last 10 seconds. Once the lines are level, the two counts are about equal, and they are not zero.
The lines level off, but the flashing never stops. Read the last line under the graph. Once the lines are level, about as many particles change from A to B as change from B to A. Each change one way is cancelled by a change the other way.
The lines wobble a little because the box holds only 150 particles, so a few chance changes show. A real sample holds so many particles that its lines are perfectly smooth.
This is why chemists call it dynamic equilibrium. Dynamic means moving. Both reactions keep running. Only the totals stay the same.
Try it: what the box shows
Here is the most common mistake in this unit. At equilibrium the rates are equal. The concentrations are not. They are constant, which means they have stopped changing. They can stop at very different values.
In our example, A levels off at 0.40 M and B levels off at 0.60 M. Some reactions stop with almost no reactant left. Others stop with almost no product. Lesson 4 shows how to tell which.
The graph below also shows something you saw in the box. Use the keys to start with only A, and then with only B.
Starting with only A: the mixture ends at 0.40 M A and 0.60 M B.
Starting with only A: the mixture ends at 0.40 M A and 0.60 M B.Starting with only B: the mixture ends at the same 0.40 M A and 0.60 M B.Concentration against time, starting with only A. The curve for A falls from 1.0 molar and levels off at 0.40 molar. The curve for B rises from zero and levels off at 0.60 molar. The curves cross early on, keep changing, and are both flat after about 40 seconds. They are flat at different heights. Starting with only A: the mixture ends at 0.40 M A and 0.60 M B.
Concentration against time, starting with only B. The curve for B falls from 1.0 molar and levels off at 0.60 molar. The curve for A rises from zero and levels off at 0.40 molar. Both are flat after about 40 seconds, at the same heights as in the experiment that started with only A. Starting with only B: the mixture ends at the same 0.40 M A and 0.60 M B.
The curves look different, but they end at the same place. At a given temperature, a reaction reaches the same equilibrium mixture whether you start with the reactants or with the products.
Key idea
Equal rates, constant concentrations. The concentrations of reactants and products do not have to be equal to each other.
On a graph of concentration against time, equilibrium is where every curve goes flat. Before that, the curves are still rising or falling, so the reaction has not reached equilibrium yet.
Two warnings. The point where two curves cross is not equilibrium. The concentrations happen to be equal there, but they are still changing. Also, the curves do not have to cross at all.
On a graph of rate against time, equilibrium is where the forward and reverse curves meet and become one flat line. Notice that this line is not at zero. Both reactions are still running.
Try it: reading the graphs
Use the two graphs above, for the reaction that starts with only A.
Equilibrium can only be reached in a closed system. That means nothing can enter or leave. If a product escapes, the reverse reaction has nothing to work with, and the reaction keeps running forward. An open bottle of soda goes flat for this reason. The carbon dioxide gas leaves and never comes back.
Equilibrium is not only for chemical reactions. Put a little water in a bottle and close it. Water evaporates, and water vapor condenses back. When those two rates are equal, the amount of liquid stops changing. Phase changes and dissolving reach equilibrium in the same way.[OpenStax Chemistry 13.1]
From the outside, a system at equilibrium looks finished. Its color, its pressure and its concentrations hold steady. Underneath, both reactions are running as fast as each other.
Common mistake
Equilibrium does not mean equal concentrations, and it does not mean the reaction has stopped. It means the two rates are equal, so the concentrations stay constant.
Strategy
On a graph of concentration against time, look for the time when every curve goes flat. That is when equilibrium is reached. Do not look for where the curves cross.
A reaction that runs in both directions. It is written with a double arrow.
The state in which the forward and reverse rates are equal, so concentrations stay constant.
Both reactions keep going at equilibrium. Neither rate is zero.
Concentrations stop changing at equilibrium. They are usually not equal to each other.
The same equilibrium mixture is reached from the reactants or from the products, at the same temperature.
Nothing enters or leaves. Equilibrium needs one.
0 of 10 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
Which statement is always true for a reaction at equilibrium?
One thing is equal at equilibrium. It is not the concentrations.
Why is chemical equilibrium described as dynamic?
Think of the flashes in the particle box after the lines went flat.
A reversible reaction is started with only reactants. As it moves toward equilibrium, what happens to each rate?
(a) Forward rate
(b) Reverse rate
Which concentration is falling, and which is rising?
The graph shows X turning into Y in a closed container. At which marked point is the reaction at equilibrium?
Concentration against time for a reaction in which X turns into Y. The curve for X falls from 0.8 molar and levels off at 0.35 molar. The curve for Y rises from zero and levels off at 0.45 molar. Three points are marked on the X curve: P at 5 seconds, where the curve is falling steeply; Q at 12 seconds, where it is still falling; and R at 40 seconds, where it is flat.
Look for where the curves are flat.
Use the same graph. The curves for X and Y cross at about 14 seconds. A student says the reaction is at equilibrium there because [X] = [Y]. Is the student correct?
Concentration against time for a reaction in which X turns into Y. The curve for X falls from 0.8 molar and levels off at 0.35 molar. The curve for Y rises from zero and levels off at 0.45 molar. Three points are marked on the X curve: P at 5 seconds, where the curve is falling steeply; Q at 12 seconds, where it is still falling; and R at 40 seconds, where it is flat.
What does equilibrium require of the concentrations: equal, or constant?
Use the same graph. At point Q, how does the forward rate compare with the reverse rate?
Concentration against time for a reaction in which X turns into Y. The curve for X falls from 0.8 molar and levels off at 0.35 molar. The curve for Y rises from zero and levels off at 0.45 molar. Three points are marked on the X curve: P at 5 seconds, where the curve is falling steeply; Q at 12 seconds, where it is still falling; and R at 40 seconds, where it is flat.
Is [X] going down, going up or holding steady at Q?
At a fixed temperature, flask 1 is filled with pure N2O4 and flask 2 with pure NO2. The flasks hold the same number of nitrogen and oxygen atoms and have the same volume. After both reach equilibrium, how do the mixtures compare?
Remember the Only A and Only B keys.
Solid calcium carbonate is heated in an open dish. It breaks down into solid calcium oxide and carbon dioxide gas, and it keeps breaking down until none is left. Why does this reaction not reach equilibrium?
Is the dish a closed system?
For A ⇌ B, the forward rate is 0.060 M/s at the start, when only A is present. Later, at equilibrium, the forward rate is 0.024 M/s. What is the reverse rate at equilibrium?
What is true of the two rates at equilibrium?
A sealed tube of N2O4 and NO2 has had the same brown color for an hour. Which conclusion is best?
Constant color means constant concentration of the brown gas.
Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.
Sections read: 0%. Practice: 0 answered.