ICE table
Initial, change and equilibrium rows for every substance in the K expression.
Unit 7: Equilibrium and Solubility, lesson 7
An ICE table is a way of keeping track of every concentration from the start of a reaction to equilibrium. With one, you can find K from a measurement, or find the whole equilibrium mixture from K.
Three quick questions on ideas this lesson uses. They are not scored.
1.In N2 + 3 H2 → 2 NH3, if 0.10 mol of N2 reacts, how many moles of NH3 form?
2 mol NH3 form for each 1 mol N2: 0.10 × 2 = 0.20 mol.
2.Solve for x: 3 = x0.80 − x.
2.4 − 3x = x, so 4x = 2.4 and x = 0.60.
3.Which concentrations go into a K expression?
K is defined with equilibrium concentrations only.
ICE stands for the three rows of the table.[OpenStax Chemistry 13.4]
The change row is where the chemistry is. The changes are not independent. They are tied together by the coefficients of the balanced equation, exactly as in stoichiometry. If the reaction runs forward, reactants go down and products go up.
Call the basic amount of change x. Then each substance changes by its coefficient times x. For N2 + 3 H2 ⇌ 2 NH3 running forward, the changes are −x for N2, −3x for H2 and +2x for NH3.
Key idea
In the change row, each entry is the coefficient times x. Reactants get a minus sign and products a plus sign when the reaction runs forward.
Hydrogen and iodine react to make hydrogen iodide: H2(g) + I2(g) ⇌ 2 HI(g). A flask starts with 1.00 M H2 and 1.00 M I2, and no HI. At equilibrium, [HI] is measured as 1.56 M. What is Kc?
| Row | H2 | I2 | 2 HI |
|---|---|---|---|
| Initial | 1.00 | 1.00 | 0 |
| Change | −x | −x | +2x |
| Equilibrium | 1.00 − x | 1.00 − x | 2x = 1.56 |
Step 1. Fill in the initial row from the problem: 1.00, 1.00 and 0.
Step 2. Write the change row with x and the coefficients: −x, −x and +2x.
Step 3. Use the measurement to find x. At equilibrium [HI] = 2x = 1.56 M, so x = 0.78 M.
Step 4. Finish the equilibrium row. [H2] = 1.00 − 0.78 = 0.22 M, and [I2] is the same.
Step 5. Put the equilibrium row into the K expression. Kc = [HI]2[H2][I2] = (1.56)2(0.22)(0.22) = 50.
Only the equilibrium row ever goes into K. Putting initial concentrations into a K expression is one of the most common mistakes.
Now turn the problem around. For the same reaction at another temperature, Kc = 49.0. A flask starts with 0.500 M H2 and 0.500 M I2. What are the concentrations at equilibrium?
| Row | H2 | I2 | 2 HI |
|---|---|---|---|
| Initial | 0.500 | 0.500 | 0 |
| Change | −x | −x | +2x |
| Equilibrium | 0.500 − x | 0.500 − x | 2x |
Put the equilibrium row into the K expression.
49.0 = (2x)2(0.500 − x)2
Both the top and the bottom are perfect squares, so take the square root of both sides.
7.00 = 2x(0.500 − x), so 3.50 − 7.00x = 2x, and x = 0.389
Then [HI] = 2x = 0.778 M, and [H2] = [I2] = 0.500 − 0.389 = 0.111 M. Always check by putting the answers back into the expression: (0.778)2(0.111)2 = 49. It matches.
Try it: set up the table
A flask starts with 0.80 M of A and nothing else. The reaction is A ⇌ 2 B.
Often the equation for x is not a perfect square. When K is very small, there is a shortcut that avoids hard algebra.
At a certain temperature, Kc = 1.6 × 10−5 for 2 NOCl(g) ⇌ 2 NO(g) + Cl2(g). A flask starts with 0.50 M NOCl.
| Row | 2 NOCl | 2 NO | Cl2 |
|---|---|---|---|
| Initial | 0.50 | 0 | 0 |
| Change | −2x | +2x | +x |
| Equilibrium | 0.50 − 2x | 2x | x |
1.6 × 10−5 = (2x)2(x)(0.50 − 2x)2
K is tiny, so very little NOCl breaks down. That means 2x is very small next to 0.50, and 0.50 − 2x is almost exactly 0.50. Replace it.
1.6 × 10−5 ≈ 4x3(0.50)2, so x3 = 1.0 × 10−6, and x = 0.010
So [Cl2] = 0.010 M and [NO] = 0.020 M. The amount of NOCl used, 0.020 M, really is small next to 0.50 M, so the shortcut was fair. Lesson 8 gives a test for when it is safe.
Key idea
When K is very small, the reactant concentration hardly changes. Treat “initial − x” as just “initial”.
For gases, an ICE table can use partial pressures and Kp. The rows and the rules are the same. Just do not mix pressures and concentrations in one table.
Common mistake
The change row must follow the coefficients: for A ⇌ 2 B the changes are −x and +2x. Then the whole equilibrium amount is raised to the power, so it is (2x)2, which is 4x2.
Strategy
Initial, change and equilibrium rows for every substance in the K expression.
Coefficient times x. Minus for what is used up, plus for what is made.
Use one measured equilibrium value to find x, complete the E row, then calculate K.
Put the E row into the K expression, solve for x, then check.
Drop x where it is subtracted from a much larger number.
0 of 9 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
For N2(g) + 3 H2(g) ⇌ 2 NH3(g) running forward, the change for N2 is −x. What are the changes for H2 and NH3?
Use the coefficients.
For N2O4(g) ⇌ 2 NO2(g), a flask starts with 0.100 M N2O4 and no NO2. At equilibrium, [NO2] = 0.040 M. What is Kc?
| Row | N2O4 | 2 NO2 |
|---|---|---|
| Initial | 0.100 | 0 |
| Change | −x | +2x |
| Equilibrium | 0.100 − x | 0.040 |
2x = 0.040, so x = 0.020. Find [N2O4] at equilibrium first.
For PCl5(g) ⇌ PCl3(g) + Cl2(g), a flask starts with 0.50 M PCl5 only. At equilibrium, [Cl2] = 0.10 M. What is Kc?
x = 0.10 M. What are [PCl3] and [PCl5] at equilibrium?
For A ⇌ B, Kc = 3.0. A flask starts with 0.80 M A and no B. What is [B] at equilibrium, in M?
3.0 = x0.80 − x.
For H2(g) + I2(g) ⇌ 2 HI(g), Kc = 64. A flask starts with 1.0 M H2 and 1.0 M I2. What is [HI] at equilibrium, in M?
Take the square root of both sides: 8.0 = 2x1.0 − x.
For A ⇌ B + C, Kc = 4.0 × 10−8. A flask starts with 0.25 M A only. What is [B] at equilibrium, in M? Use the small-x shortcut.
K ≈ x20.25.
For A(g) ⇌ 2 B(g), a container starts with A at 1.00 atm and no B. At equilibrium the total pressure is 1.20 atm. What is Kp?
| Row | A | 2 B |
|---|---|---|
| Initial (atm) | 1.00 | 0 |
| Change | −x | +2x |
| Equilibrium | 1.00 − x | 2x |
Total pressure = (1.00 − x) + 2x.
A student calculates K by putting the initial concentrations into the K expression. What is wrong?
Which row of the table describes the mixture at equilibrium?
Why can x be dropped from (0.50 − x) when K is very small?
What does a very small K say about the mixture?
Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.
Sections read: 0%. Practice: 0 answered.