Organic ChemistryAll courses
Reference

Chapter 1: Structure and Bonding, lesson 5

Molecular orbitals

Hybrid orbitals belong to one atom at a time. Molecular orbitals belong to the whole molecule. This second way of looking at bonds explains why a bond forms at all, and it is the picture chemists use when electrons spread over several atoms.

  • About 30 minutes
  • 6 sections
  • 9 practice questions
  • Narrated

After this lesson you can

  • Explain what happens when two orbitals overlap in phase and out of phase.
  • Read a molecular orbital diagram and fill it with electrons.
  • Explain why two hydrogen atoms form a bond, and why the bond has a definite length.
  • Calculate a bond order and use it to predict whether a molecule can exist.
  • Describe the π and π* orbitals of a double bond, and identify the HOMO and the LUMO.

Warm-up check

Three quick questions to set up the lesson. They are low stakes.

  1. 1.How many electrons are shared in the single bond of a hydrogen molecule, H2?

    See the answer

    A single bond is one shared pair. Each hydrogen atom brings one electron.

  2. 2.Two water waves meet. The crest of one arrives at the same place and time as the crest of the other. What happens there?

    Question 2: choose one
    See the answer

    Waves that are in step add together. Two crests make one taller crest.

  3. 3.Breaking a chemical bond:

    Question 3: choose one
    See the answer

    Bonded atoms are lower in energy than separate atoms. Pulling them apart takes energy in, and forming a bond gives energy out.

Waves can add or cancel

Lesson 4 said that an orbital is a wave and that a wave has phase. Here is why phase matters. When two waves meet, they combine. If both are up in the same place, they add and make a bigger wave. If one is up where the other is down, they cancel.

Bring two hydrogen atoms together and their 1s orbitals overlap. There are two ways for the two waves to combine, so there are two results.

in phase: electrons build up between the nucleiout of phase: a node between the nuclei
Two 1s orbitals combined in phase, and out of phase. Solid and striped lobes are the two phases of the wave.
Describe this figure

Two pictures of a pair of hydrogen nuclei. On the left, the orbitals have combined in phase into one egg-shaped cloud that covers both nuclei and is thick in the space between them. On the right, the orbitals have combined out of phase: one sphere is solid and the other is striped, and a dashed line midway between the nuclei marks a node, where there is no electron density.

In phase, the waves add in the space between the two nuclei. Electrons in this combined orbital spend much of their time between the nuclei, where they attract both. Out of phase, the waves cancel between the nuclei. That leaves a node, a place where the electrons are never found, exactly where a bond needs them most.

Key idea

Orbitals that overlap in phase build up electron density between the nuclei. Orbitals that overlap out of phase put a node there.

Two atomic orbitals make two molecular orbitals

The combined orbitals are called molecular orbitals, because they belong to the whole molecule and not to either atom. The counting rule from lesson 4 still holds. Two atomic orbitals went in, so two molecular orbitals come out.

  • The in-phase combination is lower in energy than the atomic orbitals it came from. It is called a bonding orbital. For hydrogen it is written σ.
  • The out-of-phase combination is higher in energy than the atomic orbitals. It is called an antibonding orbital, and it is marked with a star: σ*.

Electrons fill molecular orbitals by the rules you know from atoms. The lowest orbital fills first, and each orbital holds two electrons with opposite spins.

The diagram below shows the two 1s orbitals at the sides and the two molecular orbitals in the middle. It starts with the two electrons of H2. Add and remove electrons to see where they go.

energy1s1sσ*σantibondingbondingatom 1atom 2molecule

With two electrons, both sit in the bonding orbital. Both are lower in energy than they were in the separate atoms. That drop in energy is the bond.[OpenStax Chemistry 8.4]

Why two hydrogen atoms stick together

The energy drop has a physical cause, and you can follow it as two hydrogen atoms approach each other.

Two hydrogen atoms approach

  1. energydistance between nuclei74 pm436 kJ/mol released

    Step 1. Far apart, the two atoms do not feel each other. Each electron is attracted only to its own nucleus. Call this energy zero.

  2. energydistance between nuclei74 pm436 kJ/mol released

    Step 2. As the atoms move closer, their orbitals overlap. Each electron is now attracted to both nuclei, and the two electrons spend most of their time between the nuclei. The extra attraction lowers the energy. The lowest point comes when the nuclei are 74 pm apart. Forming the bond releases 436 kJ/mol.[OpenStax Organic 1.5]

  3. energydistance between nuclei74 pm436 kJ/mol released

    Step 3. Push the atoms closer than that and the energy climbs steeply. The two nuclei are both positive, and they are now close enough to repel each other strongly.

So a bond is a balance. Electrons between the nuclei pull the nuclei together. The nuclei push each other apart. The bond length is the distance where the energy is lowest, and the bond energy is the depth of the well.[OpenStax Organic 1.5]

Key idea

Two atoms bond when sharing electrons lowers their energy. The electrons are attracted to two nuclei where before each was attracted to one. The atoms settle at the distance where the energy is lowest.

Bond order: does the molecule hold together?

Electrons in a bonding orbital hold the atoms together. Electrons in an antibonding orbital do the opposite, because of the node between the nuclei. Bond order keeps score.

bond order = bonding electrons − antibonding electrons2

For H2, that is 2 minus 0, divided by 2, which is 1: a single bond. It matches the Lewis structure.

Now go back to the diagram and add electrons until there are four. That is the diagram for two helium atoms. Two electrons go into σ and two are forced into σ*. The bond order is 2 minus 2, divided by 2, which is zero. The antibonding pair cancels the bonding pair. No bond forms, and that is why helium is a gas of single atoms.[OpenStax Chemistry 8.4]

Key idea

Putting electrons into an antibonding orbital weakens a bond. Fill the antibonding orbital completely and the bond is gone.

Keep that idea. In later chapters, many reactions break a bond in just this way, by pushing a pair of electrons into its antibonding orbital.

The π bond, seen as molecular orbitals

The same reasoning applies to the π bond in ethylene. Each carbon has one p orbital left over, with one electron in it. Two p orbitals go in, so two molecular orbitals come out.

π: bondingπ*: antibonding
The two π molecular orbitals of ethylene. The lower one, π, holds both electrons. The higher one, π*, is empty. Solid and striped lobes are the two phases of the wave.
Describe this figure

Two pictures of a pair of carbon atoms joined by a line. On the left, the π bonding orbital: one solid cloud lies above both carbons and one striped cloud lies below both. On the right, the π star antibonding orbital: each carbon has its own p orbital, with the phases opposite on the two carbons, and a dashed line midway between the carbons marks a node.

In phase, the p orbitals merge into one cloud above the atoms and one below. This is the bonding orbital, π. Out of phase, there is a node between the carbons. This is the antibonding orbital, π*. Ethylene’s two π electrons both go into π, and π* stays empty.

Two of a molecule’s orbitals get special names, because they are where reactions happen.

  • The HOMO is the highest occupied molecular orbital. It holds the electrons that are easiest to take, so it is where a molecule gives electrons away.
  • The LUMO is the lowest unoccupied molecular orbital. It is the easiest place to put new electrons, so it is where a molecule accepts them.

In ethylene the HOMO is π and the LUMO is π*. Electrons in σ bonds are held much more tightly, because head-on overlap lowers their energy further. That is the orbital reason the π bond is the reactive part of a double bond.

Two models, one molecule

You now have two descriptions of bonding. They do not compete. Each is good at different things.

The hybrid orbital model of lesson 4 treats each bond as a pair of electrons shared between two atoms. It is quick, it matches Lewis structures, and it gives shapes and angles. Use it for the σ framework of a molecule.

The molecular orbital model lets electrons spread over more than two atoms. It explains why bonds form, what antibonding orbitals do, and where a molecule gives and accepts electrons. Use it for π electrons, especially when a single Lewis structure cannot describe them.

That last situation is the subject of lesson 6.

Key concepts

In phase, out of phase

In phase, orbitals add between the nuclei and make a bonding orbital. Out of phase, they cancel there and make an antibonding orbital with a node.

Orbitals are conserved

Combine two atomic orbitals and you get two molecular orbitals, one lower in energy and one higher.

Why bonds form

Shared electrons are attracted to both nuclei, which lowers the energy. The bond length is where the energy is lowest.

Bond order

bonding − antibonding2

Zero means no bond.

HOMO and LUMO

The highest occupied orbital gives electrons. The lowest unoccupied orbital accepts them. In ethylene they are π and π*.

Practice

0 of 9 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1mo basicsOpen

    Two atomic orbitals combine. How many molecular orbitals are made?

    Hint

    Orbitals are conserved, as they were when you made hybrids.

    Text solution
    1. The number of orbitals that go in equals the number that come out.
    2. Two atomic orbitals make 2 molecular orbitals: one bonding and one antibonding.
  2. Q2mo basicsOpen

    Which statement describes an antibonding molecular orbital?

    Question 2: choose one
    Hint

    It is made by combining the atomic orbitals out of phase.

    Text solution
    1. Out of phase, the two waves cancel in the space between the nuclei.
    2. That leaves a node there, and it makes the orbital higher in energy than the atomic orbitals.
    3. Like any orbital, it holds at most two electrons.
  3. Q3bond orderOpen

    The ion H2+ has only one electron, and it is in the σ bonding orbital. What is its bond order?

    Hint

    Bond order is bonding electrons minus antibonding electrons, divided by 2.

    Text solution
    1. There is 1 bonding electron and there are 0 antibonding electrons.
    2. 1 − 02 = 0.5.
    3. Half a bond is weaker than the bond in H2, but it is enough to hold the ion together.
  4. Q4bond orderOpen

    The ion He2+ has three electrons in the σ and σ* orbitals. How many are in each, and what is the bond order?

    (a) Electrons in σ

    (b) Electrons in σ*

    (c) Bond order

    Hint

    Fill the lower orbital first. It holds two electrons.

    Text solution
    1. Two electrons fill σ, and the third has to go into σ*.
    2. 2 − 12 = 0.5.
    3. The bond order is above zero, so this ion can exist, although neutral He2 cannot.
  5. Q5energy curve, dataOpen

    Two hydrogen nuclei in H2 are 74 pm apart. What happens to the energy if they are pushed closer together than that?

    Question 5: choose one
    Hint

    74 pm is the bottom of the energy well.

    Text solution
    1. The bond length is the distance where the energy is lowest.
    2. Moving the nuclei in either direction from there raises the energy.
    3. Closer together, the two positive nuclei repel each other strongly.
  6. Q6why bonds formOpen

    Why is a hydrogen molecule lower in energy than two separate hydrogen atoms?

    Question 6: choose one
    Hint

    Ask what the shared electrons are attracted to.

    Text solution
    1. Nuclei repel nuclei, and electrons repel electrons.
    2. The attraction is between electrons and nuclei.
    3. In the molecule each electron is attracted to both nuclei, which lowers the energy.
  7. Q7homo lumoOpen

    In ethylene, which orbital is the HOMO?

    Question 7: choose one
    Hint

    HOMO means the highest orbital that has electrons in it.

    Text solution
    1. Ethylene's π orbital holds two electrons, and it is higher in energy than the σ orbitals.
    2. The π* orbital is higher still, but it is empty.
    3. So the HOMO is π, and the LUMO is π*.
  8. Q8homo lumo, reactivityOpen

    A molecule accepts a pair of electrons from another molecule. Which of its orbitals do the new electrons go into?

    Question 8: choose one
    Hint

    The new electrons need an orbital that has room.

    Text solution
    1. Occupied orbitals are full, so new electrons must go into an empty one.
    2. The lowest empty orbital costs the least energy to fill.
    3. That orbital is the LUMO.
  9. Q9bond order, piOpen

    Light can lift one electron in ethylene from the π orbital up to the π* orbital. What is the π bond order afterward?

    Hint

    After the jump there is one electron in π and one in π*.

    Text solution
    1. Bonding electrons: 1. Antibonding electrons: 1.
    2. 1 − 12 = 0.
    3. With no π bond left, the two ends of the molecule are free to rotate. This is how light can turn a cis double bond into a trans one.
Moreextra practice, new numbers every timenot scored

Want another question on this lesson? Each one is made fresh, so you can keep going until it feels easy.

Sources

  • OpenStax Chemistry 8.4. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 8.4, Molecular Orbital Theory. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/8-4-molecular-orbital-theory
  • OpenStax Organic 1.5. McMurry, J. Organic Chemistry: A Tenth Edition, section 1.5, Describing Chemical Bonds: Valence Bond Theory. OpenStax, 2023. https://openstax.org/books/organic-chemistry/pages/1-5-describing-chemical-bonds-valence-bond-theory

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?